If you are still uncertain in buying an electric pet fence system because of the hassle in burying the wires, then think again! Electric Pet Fence 4Less offers a new product that will take away all the hassles in digging the ground just to bury the wires. Our offered Securing Staples will help you set up an “Underground Fence System” without burying the wires. These staples will let you secure the wires above the ground, and after a good rain the grass in your garden will cover them.

The Above Ground Installation method is perfect for dog owners who just renting their homes or those who don’t just like the idea of digging the soil and burying the wires. And this technique offers the same effect as with buried wires.

 

Step 1:

» First lay out your boundary wire in your desired shape and around the area you want to contain. From your boundary wire run twisted wire to your transmitter and pug it in.
» Once you have decide the system you chose is correct for you, "Staple" the twisted wire to the ground by hammering in a wire "Staple" every 5 - 6 feet.
» Now stop and look at the wire. Is it completely flush to the ground all the way to the start of the boundary? The wire MUST completely touch the ground. If not go and "Staple" any raised areas before proceeding to the next step.

Step 2:

» Place a "Staple" where the twisted wire and the beginning of the boundary meet (if you have a splice in this area please dig a small hole about 2 inches deep and bury the splice. Then place a "Staple" in the front of and behind the splice to relieve any pressure on the splice)
» Next, walk to the first corner of your boundary and "Staple" it to the ground. Repeat this step for all corners of your boundary. (Not all yards are square if you do not have corners on your boundary please select multiple anchor points for the wire)
» Now place staples as needed and make sure to staple any raised areas down until they are completely flush with the ground, for maximum safety for you and your guests.